Opto Engineering® - 20 years
Home Accessories MTDV series
MTDV4CH-22A4
Specifications
Downloads
Compatible products
Electrical specifications
User interface (1) Ethernet (TCP/IP)
Connectors 1x RJ45, 1x USB Type A, 2x Terminal blocks, 4x DB15HD female
Status LED Ethernet activity LED, RGB LED for each motor status
DC power supply (V) 24
Max power consumption (W) 96
Protections ESD, polarity inversion, overvoltage, undervoltage, output overcurrent, shorted output, open output, overtemperature
Functions
Control type Closed-loop, open-loop
Motion mode Positioning mode (relative and absolute) with 2 stage velocity ramp
Special features (2) Advanced motor drive with StealthChop™ and 256x SpreadCycle™, extremely silent operation, adjustable RUN and HOLD currents for optimized power consumption, advanced positioning control in closed-loop operation, motor homing based on encoder reference or limit switch, reduced EMI noise
Configuration software Integrated web interface (Ethernet), Ethernet DLL library (USB and RS485 to be developed upon request)
Automatic position saving Yes
Non volatile memory Yes
Motor parameters
Number of motors 4
Type Bipolar stepper
RMS winding current (mA) 20 to 935 (adj)
Peak winding voltage (V) 24 (PWM)
Encoder parameters
Number of encoders 4
DC power supply (V) 5
Type Linear/rotary, incremental
Output signals A, B, Z (index)
Encoder interface RS422
Mechanical specifications
Width (mm) 94.0
Length (3) (mm) 80.0
Height (3) (mm) 84.0
Mounting DIN rail
Environmental specifications
Operating temperature (°C) 10-40
Storage temperature (°C) 0-50
Operating relative humidity 20-85, non condensing
IP rating IP20
Installation Indoor use only
Compatibility
Cables CBMT002, CBETH003

Last update 05 Sep 2023

CE
ROHS
REACH
WEEE
UKCA

Notes

  1. USB and RS485 interface could be implemented upon request
  2. StealthChop™ and SpreadCycle™ are property of their respective owners.
  3. Excluded DIN rail.

Ordering information

CBMTxxx cables are required to connect MTDV to compatible lenses. All compatible products must be ordered separately.
See the lens product page for more informations on the proper cable to order.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

MTDV manual

Software

MTDV Library v1.0
MTDV Firmware Update Utility v2.0

Firmware

MTDV driver main v2.3
MTDV driver stepper v2.5

Datasheet

Download datasheet
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
TCZR036S
Bi-telecentric zoom with motorized controls, magnification from 0.25x to 2x, for detectors up to 2/3″
TCZR072S
Bi-telecentric zoom with motorized controls, magnification range 0.125x to 1x, for detectors up to 2/3″
CBMT002
15 wires cable, DB15HD Male to DB15HD Female connector, 2 m
RT-A72-0418-03
Ethernet cable, CAT6A, industrial level,high flexible cable with screw, 3 m
RT-A72-0418-05
Ethernet cable, CAT6A, industrial level,high flexible cable with screw, 5 m
RT-A72-0418-10
Ethernet cable, CAT6A, industrial level,high flexible cable with screw, 10 m
RT-A72-0418-15
Ethernet cable, CAT6A, industrial level,high flexible cable with screw, 15 m
Request a quote
Add this product to the quote request list.